• Inconel 718 Fasteners, Inconel UNS N07718 Fasteners, Inconel 718 fasteners, Inconel Alloy 718 Fasteners ,Inconel 718 Fasteners Manufacturers in india,Inconel 718 Fasteners Suppliers

Inconel 718 Fasteners Manufacturers in india

ASTM B637 UNS N07718,Inconel 718 Fasteners,Inconel 718 Fasteners Suppliers,Inconel 718 Fasteners Manufacturers in india,Inconel 718 Fasteners Suppliers in India

Inconel DIN 2.4668 Screws, Inconel 718 heavy hex nuts, Inconel Alloy 718 threaded rod, Inconel 718 round head bolts,ASTM B637 Inconel 718 Fasteners, Alloy 718 Fasteners, Inconel 718 Studs, Inconel 718 Threaded Rod, Inconel 718 Hex Bolts, Inconel 718 Hex Nuts, UNS N07718 Fasteners, Alloy 718 Nuts,Inconel 718 Fasteners Exporters in India, Inconel 718 Fasteners Distributors in India, Inconel 718 Fasteners Traders in India, Inconel 718 Fasteners Stockist in India, Alloy 718 Bolts, Alloy 718 Screws, Alloy 718 washers, Alloy 718 Studs Manufacturer & Stockist Supplier & Manufacturer

ASTM B637 Inconel Fasteners, Inconel 718 hex cap screw, Inconel Alloy UNS N07718 High Tensile Fasteners, Inconel 718 Nuts,Inconel 718 u bolts, Inconel 718 special alloy fasteners bolt and nut, UNS N07718 Inconel 718 W.Nr 2.4668 fasteners, alloy 718 inconel fastener cotter pin bolt, Inconel 718 stud bolts,Inconel 718 Fasteners Stockholder in India, Inconel 718 Fasteners Wholesaler in India, Inconel 718 Fasteners Importers in India, Inconel 718 Spring Washers, bearing 718 inconel bolts and screws, Inconel 718/2.4668 fasteners hex socket bolts, Inconel Alloy 718 flat washer Manufacturer & Exporter

Inconel 718 Fasteners


Inconel 718 Fasteners Specification


Material
Size
Length
Specification
Manufacturer
Inconel 718 Fasteners
M 02 to M 160

3 mmto

200 mm

  • DIN
  • ISO
  • JIS
  • GB
  • IS
  • BS
  • ASTM
  • GKW
  • Unbrako
  • Kundan
  • APL
  • Sundaram Precision
  • Infasco
  • EBY Fastener Etc.

Inconel 718 Fasteners Useful Information


Alloy
Common Name
Related Specification
 
 
British
European
ASTM
UNS
Alloy 718
Inconel 718 ®
BS 3076 NA 21
2.4856
B446
N06718

Inconel 718 Fasteners Mechanical Properties :


Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.4  g/cm3 1350 °C (2460 °F) Psi – 1,35,000 , MPa – 930 Psi – 75,000 , MPa – 517 42.5 %

Inconel 625 Fasteners Chemical Composition:


C0 Ni Fe Mn C S Si Cr2 Mo Al Ti P Nb + Ta
1.0 max 58.0 min 5.0 max 0.50 max 0.10 max 0.015 max 0.50 max 20.0-23.0 8.0-10.0 0.40 max 0.40 max 0.015 max 3.15–4.15

Inconel 718 Fasteners Manufacturer in Mumbai,maharashtra, Inconel 718 Fasteners Manufacturers in Rajkot,gujarat, Manufacturer of Inconel 718 Fasteners in India, Supplier of Inconel 718 Fasteners in India, Exporter of Inconel 718 Fasteners in India, Distributor of Inconel 718 Fasteners in India

Other Types Of Inconel 718 Fasteners


Inconel 718 Fasteners Inconel Alloy Fasteners
Inconel 718 Nuts Inconel Alloy 718 Bolts Supplier
Inconel 718 Washers Exporter Inconel 718 Stud Bolt
Inconel 718 Fender Washer Inconel Bolts Manufacturer
ASTM B637 Cap Screw Inconel Alloy 718 Foundation Bolts
UNS N07718 Square Bolts Supplier Inconel Punched Washer Distributor
Inconel Lock Nut Supplier Inconel 718 Coupler Nuts
Inconel Flat Washer Inconel Alloy 718 Locking Nuts Manufacturer
Inconel Studbolt ISO Certified Inconel 718 Countersunk Slotted Screw
Inconel 718 Square Nut Exporter Inconel Pan Head Screw Stockist
DIN 2.4668 Inconel Bolts Manufacturer Inconel Alloy 718 Pan Head Screw
Inconel 718 Double Ended Stud Inconel 718 Tie Bar Exporter
Inconel Din 2.4668 Fasteners Alloy 718 Fasteners

Inconel 718 Fasteners Average Physical Properties


Physical Properties

°F

British Units

°C

Metric Units

Density

Room

0.304 lb./cubic in.

Room

8.43g/cubic cm

Electrical

Resistivity

70

200

400

600

800

40.6 microhm-in.

40.9

41.5

42.2

43.0

21

93

204

316

427

1.03 microhm-m

1.04

1.05

1.07

1.09

Mean Coefficient

of Thermal

Expansion

70-200

70-400

70-600

70-800

7.4 microinches/in.-°F

7.7

7.9

8.1

21-93

21-204

21-316

21-427

13.3 x 10(-6)m/m·K

13.9

14.2

14.6

Thermal

Conductivity

70

200

400

600

800

103 Btn-in./ft².-hr.-°F

109

121

133

145

21

93

204

316

427

14.8 W/m·K

15.7

17.4

19.2

20.9

Modulus

of Elasticity

Room

30.0 x 10(6) psi

Room

207 GPa


Inconel Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard: DIN 933, DIN 931, ANSI, JIS standards
Inconel 625 Fasteners In Form of:
  • Hex
  • Square
  • Round
  • Threading as per Gauge Etc.
Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Inconel 718 Fasteners Packing: IN BULK :canton/pallet, Small Boxs/carton/ pallet, or customer request
Inconel 718 Fasteners Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Property Class: For Bolts & Screws: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593HFor Nuts: A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040For SHCS: F837B, F837C, F837E, F837For Threaded Rods: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2
Inconel 718 Fasteners finishing: Zinc (yellow, white, blue, black), black oxide,Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: PassivatedSelf-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Production process M2-M24: Cold Froging, hot forging M24-M100,machining and CNC for Customized connecting element
Inconel 718 Fasteners Origin and service-region: EuropeanOrigin of Inconel 718 Fasteners are Western European. However projects with eastern origin are possible on request.
Inconel Fasteners Grades: Inconel 600 Fasteners, Inconel 601 Fasteners, Inconel 625 Fasteners, Inconel 718 Fasteners, Inconel X-750 Fasteners
Surface Coating:
  • Hot Dipped Galvanizing Fasteners
  • Phosphate Fasteners
  • Teflon Fasteners
  • Ptfe Coated Fasteners
  • Xylon Fasteners
  • Zinc Fasteners
  • Cadmium Fasteners

Our Fastener plant is equipped with various testing facilities like Tensile Testing Machine also known as tension testing. We also conduct other tests like Hardness Test, IGC Test, Positive Material Identification Test to ensure that all the product going out of our manufacturing plant are the best in terms of quality.


Related ASTM Specifications

  •  ASTM A1082 / A1082M – 16 : Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
  •  ASTM A1014 / A1014M – 16 : Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
  •  ASTM F2281 : Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications Designation
  •  ASTM A453 / A453M – 16 : Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
  •  ASTM A638 / A638M : Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
  •  ASTM B637 – 15 : Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
  •  ASTM B564 – 15 : Standard Specification for Nickel Alloy Forgings
  •  ASTM A962 / A962M – 16a : Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
  •  ASTM F467 – 15 : Standard Specification for Nonferrous Nuts for General Use
  •  ASTM F468 – 15 : Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

Other Related Specification


Alloy
Common Name
Related Specification
British
European
ASTM
UNS
Alloy 600 Fasteners
Inconel 601 ®
BS 3076 NA 14
2.4816
B166
N06600
Alloy 601 Fasteners
Inconel 601 ®
2.4627
B166
N06601
Alloy 625 Fasteners
Inconel 625 ®
BS 3076 NA 21
2.4856
B446
N06625
Alloy 718 Fasteners
Inconel 718 ®
1.4668
B637
N07718
Alloy 750 Fasteners
Inconel 750 ®
2.4669
B637
N07750
Alloy 400 Fasteners
Monel 400 ®
BS 3076 NA13
2.4360
F467
N04400
Alloy K500 Fasteners
Monel K500 ®
BS 3076 NA18
4.4375
B865-04
N05500
Alloy C276 Fasteners
Hastelloy C276 ®
2.4819
B574
N10276
Alloy 22 Fasteners
Hastelloy C22 ®
2.4602
B574
N06022
Alloy B2 Fasteners
Hastelloy B2 ®
B335
N10665
Alloy X Fasteners
Hastelloy X ®
2.4655
B572
N06002
Alloy B3 Fasteners
Hastelloy B3 ®
2.4600
B335
N10675
Alloy G30 Fasteners
Hastelloy G30 ®
2.4603
B581
N06030
Alloy 50 Fasteners
Nitronic 50 ®
A479 XM-19
S20910
Alloy 60 Fasteners
Nitronic 60 ®
A193 B8S
S21800
Alloy 75 Fasteners
Nimonic 75 ®
2.4951
B637
N06075
Alloy 80A Fasteners
Nimonic 80A ®
BS 4882 NA20
2.4952
B637
N07080
Alloy 90 Fasteners
Nimonic 90 ®
B408
N07090
Alloy 800 Fasteners
Incoloy 800 ®
BS 3076 NA15
1.4876
B408
N08800
Alloy 800H Fasteners
Incoloy 800H ®
B408
Alloy 800 HT Fasteners
Incoloy 800HT ®
1.4959
B408
N08811
Alloy 825 Fasteners
Incoloy 825 ®
BS 3076 NA16
2.4858
B425
N08825
Alloy 925 Fasteners
Incoloy 925 ®
B805
N09925
Alloy DS Fasteners
Incoloy DS ®
BS 3076 NA17
1.4862
N08330

Types of Available Inconel 718 Fasteners

Types Of Inconel 718 Bolts


 Inconel 718 12 Point Flange Bolt
 Inconel 718 Cap Screws & Hex Bolts
 Inconel 718 Carriage Bolts
 Inconel 718 Flange Bolts
 Inconel 718 Structural Bolts
 Inconel 718 Tension Indicating Bolts
 Inconel 718 Heavy Hex Cap Screws & Heavy Hex Bolts
 Inconel 718 Square Head Bolts
 Inconel 718 U-Bolts
 Inconel 718 Ferry Cap Screws
 Inconel 718 Plow Bolts
 Inconel 718 Hanger Bolts
 Inconel 718 Elevator Bolts
 Inconel 718 Eye Bolts
 Inconel 718 Tension Control Bolts
 Inconel 718 Connector Bolts
 Inconel 718 Tower Bolts
 Inconel 718 Penta Bolts
 Inconel 718 Step Bolts
 Inconel 718 Coil Bolts
 Inconel 718 J-Bolts
 Inconel 718 Sidewalk Bolts
 Inconel 718 Timber Bolt
 Inconel 718 Bin Bolts
 Inconel 718 U-Bolt Plates
 Inconel 718 Track Bolts
 Inconel 718 Hurricane Bolts
 Inconel 718 Draw Bolts
 Inconel 718 Lag Bolt
 Inconel 718 Stove Bolt
 Inconel 718 Machine Bolt
 Inconel 718 Tap Bolt
 Inconel 718 Grub Screw
 Inconel 718 Set Screw
 Inconel 718 Shoulder Bolt
 Inconel 718 T Head Bolts
 Inconel 718 Through Bolts
 Inconel 718 Toggle Bolts
 Inconel 718 Torx Bolts
 Inconel 718 Wing Bolts

Types Of Inconel 718 Nuts


 Inconel 718 Hex Nuts
 Inconel 718 Lock Nuts
 Inconel 718 Jam Nuts
 Inconel 718 Heavy Hex Nuts
 Inconel 718 Acorn Nuts
 Inconel 718 Flange Nuts
 Inconel 718 Slotted Nuts
 Inconel 718 Weld Nuts
 Inconel 718 Coupling Nuts
 Inconel 718 Wing Nuts
 Inconel 718 Square Nuts
 Inconel 718 Castle Nuts
 Inconel 718 Allenuts
 Inconel 718 Spring Nuts
 Inconel 718 Cage Nuts
 Inconel 718 High Nuts
 Inconel 718 Acme Nuts
 Inconel 718 Cap Nuts
 Inconel 718 Coil Nuts
 Inconel 718 Security Nuts
 Inconel 718 Handle Nuts
 Inconel 718 Hurricane Nuts
 Inconel 718 Hex Machine Screw Nuts
 Inconel 718 Self Clinching Nuts
 Inconel 718 Metric Nuts
 Inconel 718 Forged Eye Nut
 Inconel 718 Rivet Nuts
 Inconel 718 Two-way reversible lock nuts

Types Of Inconel 718 Screws


 Inconel 718 Self Drilling Screw
 Inconel 718 Self Tapping Screw
 Inconel 718 Thread Rolling Screw
 Inconel 718 Thread Cutting Screw
 Inconel 718 Machine Screw
 Inconel 718 Concrete Screw
 Inconel 718 Roofing Screw
 Inconel 718 Drywall Screw
 Inconel 718 Particle Board Screw
 Inconel 718 Chipboard Screw
 Inconel 718 Construction screws
 Inconel 718 Coach screws / Lag screw
 Inconel 718 Wood Screw
 Inconel 718 Euro Screw
 Inconel 718 Collated Screw
 Inconel 718 Furniture Screw
 Inconel 718 Sems Screw
 Inconel 718 Thumb & Wing Screws
 Inconel 718 Cap Screws
 Inconel 718 Phillips Head Screw
 Inconel 718 Set screws
 Inconel 718 Metric set screws
 Inconel 718 Sheet metal screws
 Inconel 718 Eye screw
 Inconel 718 Security head screw

Types Of Inconel 718 Washers


 Inconel 718 belleville-washers
Inconel 718 bond-sealing-washers
 Inconel 718 countersunk-finishing-washers
 Inconel 718 dock-washers
 Inconel 718 fender-washers
 Inconel 718 flat-washers
 Inconel 718 lock-washers
 Inconel 718 neoprene-washers
Inconel 718 square-bevel-washers
 Inconel 718 star-washers
 Inconel 718 tab-washers
 Inconel 718 hilside-washers
 Inconel 718 conical-washers
 Inconel 718 wave-washers
 Inconel 718 ogee-washers
 Inconel 718 round-mall-washers

Type Of Inconel 718 Bolts

  • Inconel 718 Hex Head Bolt
  • Inconel 718 Socket Cap Screw
  • Inconel 718 Carriage Bolt
  • Inconel 718 Flange Bolt
  • Inconel 718 Elevator Bolt
  • Inconel 718 Lag Bolt
  • Inconel 718 Stove Bolt
  • Inconel 718 Tap Bolt
  • Inconel 718 Machine Bolt
  • Inconel 718 Grub Screw
  • Inconel 718 Set Screw
  • Inconel 718 Shoulder Bolt
  • Inconel 718 Anchor Bolt
  • Inconel 718 Eye Bolt
  • Inconel 718 Plow Bolt
  • Inconel 718 Draw Bolt
  • Inconel 718 Hanger Bolt
  • Inconel 718 Step Bolt
  • Inconel 718 U Bolt
  • Inconel 718 J Bolt

Type Of Inconel 718 Screws

  • Inconel 718 Self Drilling Screw
  • Inconel 718 Machine Screw
  • Inconel 718 Particle Board Screw
  • Inconel 718 Self Tapping Screw
  • Inconel 718 Concrete Screw
  • Inconel 718 Chipboard Screw
  • Inconel 718 Thread Rolling Screw
  • Inconel 718 Roofing Screw
  • Inconel 718 Construction screws
  • Inconel 718 Thread Cutting Screw
  • Inconel 718 Drywall Screw
  • Inconel 718 Coach screws / Lag screw
  • Inconel 718 Wood Screw
  • Inconel 718 Euro Screw
  • Inconel 718 Collated Screw
  • Inconel 718 Furniture Screw
  • Inconel 718 Cap Screws
  • Inconel 718 Thumb & Wing Screws
  • Inconel 718 Sems Screw
  • Inconel 718 Screw

Type Of Inconel 718 Nuts

  • Inconel 718 Hex Nuts
  • Inconel 718 Heavy Hex Nut
  • Inconel 718 Cap Nut
  • Inconel 718 Coupling Nut
  • Inconel 718 Square Nut
  • Inconel 718 Castle Nut
  • Inconel 718 Flex Lock Nut
  • Inconel 718 High Nut
  • Inconel 718 K Lock Nut
  • Inconel 718 Serrated Flange Nut
  • Inconel 718 Flange Lock Nut
  • Inconel 718 Nylon Lock Nut
  • Inconel 718 Slotted Nut
  • Inconel 718 2 Way Lock Nut
  • Inconel 718 Custom Nut
  • Inconel 718 Acorn Nut
  • Inconel 718 Wing Nut
  • Inconel 718 Jam Nut
  • Inconel 718 T Nuts

Type Of Inconel 718 Washers

  • Inconel 718 Plain / Flat Washer
  • Inconel 718 Spring Washers
  • Inconel 718 Dome Washer
  • Inconel 718 Dome Tooth Washer
  • Inconel 718 Countersunk Washer
  • Inconel 718 Tooth Lock Washer
  • Inconel 718 Ogee Washer
  • Inconel 718 Hex Washers
  • Inconel 718 Split /Lock Washer
  • Inconel 718 Hexagonal Washer
  • Inconel 718 Square Washer
  • Inconel 718 Dock Washer
  • Inconel 718 Customized Washer
  • Inconel 718 Fender Washer
  • Inconel 718 Tab Washers

Inconel 718 Fasteners At Best Price


Inconel 718 Fasteners Dimensions


Inconel 601 Bolts
  •   Inconel 718 Hex Head Bolts– DIN 7991, ISO 10642, ASME B18.5 / B18.6.3
  •   Inconel 718 Countersunk Bolts – DIN 912, ISO 4762, JIS B1176, ASME B18.3.1
  •   Inconel 718 Allen Bolts – ASME / ANSI B18.3, DIN ISO 7379
  •   Inconel 718 Socket Shoulder Bolts – DIN 32501 / 34817, ISO 13918
  •   Inconel 718 Weld Bolts – ASME / ANSI B18.6.8, DIN 316
  •   Inconel 718 Wing Bolts – ASME / ANSI B18.15, DIN 580 / 444, ISO 3266
  •   Inconel 718 Eye Bolts – ASME / ANSI B18.31.5, DIN 3570
  •   Inconel 718 U Bolts– ASME / ANSI B18.31.5, DIN 3570

Inconel 718 Screws
  •   Inconel 718 Hex Head Cap Screw – DIN 912, ISO 4762, JIS B1176, ASME B18.3.1
  •   Inconel 718 Socket Head Cap Screw – DIN 7991, ISO 10642, ASME B18.5 / B18.6.3
  •   Inconel 718 Countersunk Screw – ASME B18.3.4M, ISO 7380
  •   Inconel 718 Button Head Screw – ASME / ANSI B18.3, DIN ISO 7379
  •   Inconel 718 Socket Shoulder Screw– ASME /ANSI B18.3, ISO 4029 / 4026 /4028 / 4027 /, JIS B1177, DIN 913 / 914 / 915 / 916
  •   Inconel 718 Socket Set Screws – ASME / ANSI B18.6.8, DIN 316
  •   Inconel 718 Wing Screws – ASME / ANSI B18.6.8, DIN 316

Inconel 718 Nuts
  •   Inconel 718 Hex Nut – DIN 936, ISO 4035, UNI 5589, ASME B18.2.2 / B18.2.4.6M
  •   Inconel 718 Hex Jam Nut – ISO 4033, UNI 5587, ASME B18.2.2 / B18.2.4.6M
  •   Inconel 718 Heavy Hex Nut – ASME B18.2.2 / B18.2.4.6M
  •   Inconel 718 Heavy Hex Jam Nut – DIN 935, ISO 7035, ASME B18.2.2 / B18.2.4.3M
  •   Inconel 718 Hex Slotted Nut – DIN 6923, ISO 4161, ASME B18.2.2 / B18.2.4.2M
  •   Inconel 718 Flange Nut – DIN 982 / 985 / 986, ANSI B18.16.3M / ASME B18.6.6
  •   Inconel 718 Nylon Insert Lock Nut – DIN 1587 / 6334 , ASME B18.2.2 / B18.2.4
  •   Inconel 718 Dome Nut – DIN 315, ASME B18.6.9 / ANSI B18.17
  •   Inconel 718 Wing Nut – DIN 929, ISO 21670, ASME B18.2.2
  •   Inconel 718 Weld Nut – DIN 929, ISO 21670, ASME B18.2.2

Inconel 718 Washers
  •   Inconel 718 Plain Washer – ISO 7093 / 7092
  •   Inconel 718 Heavy Washer – DIN 7349, DIN 6796
  •   Inconel 718 Extra Duty Washer – ASME B18.22.1
  •   Inconel 718 Hicollar Washer – DIN 436 / 6918 / 434, ANSI B18.23.1 / ASME B18.22.1
  •   Inconel 718 Square Washer – DIN 127 / 128 / 7980, ASME B18.21.1
  •   Inconel 718 Spring Washer – DIN 127 / 128 / 7980, ASME B18.21.1

Inconel 718 Threaded Rod
  •   Inconel 718 Half Thread Stud Bolt – ASME B18.31.2 / B18.2.1 / B16.5, DIN 975 / 976
  •   Inconel 718 Full Thread Stud Bolt – DIN 938 / 939 / 6379, ASME B18.31.2
  •   Inconel 718 Tap End Stud Bolt – DIN 525, ISO 13918
  •  Inconel 718 Welding Stud – DIN 525, ISO 13918

Available Inconel Fasteners Grades



Inconel 718 Fasteners As Per DIN /BS Grades


Hexagon Bolts / Set Screws
Stud Bolts
Hexagon Nuts
Socket Cap screws
DIN 931
BS4882
DIN 934
DIN 912
DIN 933
DIN 976
BS 1768
DIN 6912
BS 1768
BS 1769
DIN 7984
UNI 5731
BS 1083
ANSI B18.3
UNI 5739
BS 3692
ISO 4762
ISO 4014
ISO 4032
UNI 5931
ISO 4017
ISO 4033
BS 2470
BS 1769
ANSI B18.2.2
BS 4168
BS 3692
ANSI B18.2.1

Socket & Slotted Set Screws
Socket & Slotted Countersunk Screws
Studs
Washers
DIN 913
DIN 963
DIN 938
DIN 125
DIN 914
DIN 7991
DIN 939
DIN 9021
DIN 915
BS 4168
DIN 2510
BS 4320
DIN 916
BS 1981
BS 4439
BS 3410
DIN 551
BS 483
BS 2693
DIN 553
BS 2470
Spring Washers
DIN 438
DIN 127
BS 4168
BS 4464
BS 1802

Fasteners astm Grades


ASTM A193 Grade B5, ASTM A193 Grade B6, ASTM A193 Grade B7, ASTM A193 Grade B16, ASTM A193 Grade B8, ASTM A193 Grade B8C, ASTM A193 Grade B8M, ASTM A193 Grade B8T, ASTM A193 Grade B8, ASTM A193 Grade B8C, ASTM A193 Grade B8M, ASTM A193 Grade B8T, ASTM A320 Grade L7, ASTM A320 Grade L7A, ASTM A320 Grade L7B, ASTM A320 Grade LC7, ASTM A320 Grade L43, ASTM A320 Grade B8, ASTM A320 Grade B8C, ASTM A320 Grade B8T, ASTM A320 Grade B8F, ASTM A320 Grade B8M, ASTM A320 Grade B8, ASTM A320 Grade B8C, ASTM A320 Grade B8F, ASTM A320 Grade B8M, ASTM A320 Grade B8T, SAE J429 Grade 5, ASTM A449, SAE J429 Grade 5.1, SAE J429 Grade 5.2, ASTM A325 Type 1, ASTM A325 Type 2, ASTM A325 Type 3, ASTM A354 Grade BB, ASTM A354 Grade BC, SAE J429 Grade 7, SAE J429 Grade 8, ASTM A354 Grade BD, SAE J429 Grade 8.1, ASTM A490

Inconel 718 Fasteners Surface Treatments

  •  Hot Dipped Galvanized Fasteners
  •  Phosphate Coated Fasteners
  •  Teflon Coated Fasteners
  •  Xylon Coated Fasteners
  •  Zinc Coated Fasteners
  •  Cadmium Coated Fasteners
  •  Electro Zinc plated Fasteners
  •  Electro Cadmium Plated Fasteners
  •  Ceramic Filled PTFE Coated Fasteners
  •  Electroless Nickel Plated Fasteners
  •  Zinc Nickel Coated Fasteners
  •  Aluminium Coated Fasteners
  •  Silver Coated Fasteners
  •  Zinc/Nickel by Electrodeposition Fasteners
  •  Dacromet Fasteners
  •  Geomet Fasteners

Inconel Fasteners Surface Treatments


Inconel 718 Fasteners Packaging

In generally, If you have no special requirement, we will use the mass packing (bag carbon tray). If you want to do the special packing, please advise us the specific details, pictures or design.

Shipping

In generally, our customer often request to delivery by express, plane or sea. Any other better way will be also accepted well.


Inconel Fasteners PackagingPackaging


Inconel 718 Fasteners Inventory


We export


Our Sales Network


  • We are Exporter of Inconel Alloy 718 Fasteners in Worldwide Such as India, Tibet, Saudi Arabia, Canada, Serbia, Spain, Austria, Iraq, Chile, Lithuania, Taiwan, Libya, Ecuador, India, Thailand, Iran, New Zealand, Poland, Algeria, Colombia, Bulgaria, Qatar, Bhutan, Germany, Australia, Ghana, Indonesia, South Korea, Lebanon, Kazakhstan, Macau, South Africa, Croatia, Israel, Namibia, Kuwait, Estonia, Pakistan, Norway, Czech Republic, Bahrain, Mongolia, Nigeria, Afghanistan, Egypt, Belgium, Bolivia, Vietnam, Jordan, Kenya, Singapore, France, Netherlands, Azerbaijan, Nepal, Romania, China, Slovakia, Angola, Philippines, Belarus, Morocco, Turkey, Greece, Portugal, Switzerland, Hong Kong, Nigeria, Peru, Chile, Iran, United Kingdom, Denmark, Yemen, Bangladesh, Argentina, Russia, Mexico, Malaysia, Italy, Trinidad & Tobago,Tunisia, Japan, Sri Lanka, Brazil, Gabon, Ireland, Puerto Rico, Hungary, United Arab Emirates, Gambia, Sweden, Finland, United States, Venezuela, Oman, Zimbabwe, Costa Rica, Mexico, Ukraine, Poland.

  • We are Suppliers of Inconel 718 Fasteners in India Such as Mumbai, Hanoi, Noida, Chiyoda, Nashik, Ankara, Vadodara, Pimpri-Chinchwad, Chennai, Cairo, Montreal, Perth, Aberdeen, Doha, Karachi, Granada, Rajkot, Calgary, Santiago, New York, Thane, Manama, Riyadh, Tehran, Geoje-si, Hyderabad, Dubai, Moscow, Sydney, Ahmedabad, Ulsan, Singapore, Jakarta, Vung Tau, Melbourne, Al Khobar, London, Navi Mumbai, Ernakulam, Gimhae-si, Ranchi, Algiers, Kuala Lumpur, La Victoria, Courbevoie, Secunderabad, Hong Kong, Haryana, Rio de Janeiro, Dammam, Los Angeles, Al Jubail, Bogota, Kuwait City, Mumbai, Gurgaon, Port-of-Spain, Faridabad, Colombo, Ludhiana, Milan, Abu Dhabi, Dallas, Bangkok, Bhopal, Ahvaz, Ho Chi Minh City, Lagos, Surat, Madrid, Thiruvananthapuram, Busan, Chandigarh, Coimbatore, New Delhi, Sharjah, Houston, Baroda, Istanbul, Howrah, Mexico City, Bengaluru, Lahore, Petaling Jaya, Jeddah, Visakhapatnam, Jaipur, Brisbane, Seoul, Muscat, Kolkata, Indore, Atyrau, Kanpur, Caracas, Edmonton, Toronto, Jamshedpur, Nagpur, Pune.


Our Associate Manufacturer

Melesi

Melesi

Metalfar

Metalfar

Raccortubi S.p.A.

Raccortubi S.p.A.

TecnoForge

TecnoForge

Ulma

Ulma

BENKAN Corporation

BENKAN Corporation

BKL

BKL

Interfit

Interfit

Lame S.r.l.

Lame S.r.l.

Mega

Mega


Trader of Inconel 718 Fasteners in India, Stockist of Inconel 718 Fasteners in India, Stockholder of Inconel 718 Fasteners in India,Inconel 718 Lock Washers, Inconel 718 Beveled Washers, Inconel 718 Threaded Rod, Inconel 718 Stud Bolts, Inconel 718 Continuous Thread Studs, Inconel 718 Double End Studs, Inconel 718 Tap End Studs, Inconel 718 Threaded Taper Pins, Inconel 718 Dowel Pins distributor, stockholder and supplier in Malaysia, UAE, Iran, Singapore & Saudi Arabia,We supply Inconel 718 Fasteners with zero error rate & 100% -Liefertreue, Inconel 718 Nuts, Inconel 718 Bolts, Inconel 718 screws, Inconel 718 washers, Inconel 718 Bolts and Screws, Inconel 718 Heavy Hex Bolts, Inconel 718 Finished Hex Bolts, Inconel 718 Oval Neck Track Bolts, Inconel 718 Bent Bolts, Inconel 718 Hex Cap Screws, Inconel 718 Heavy Hex Screws, Inconel 718 12-Point Screws, Inconel 718 Socket Head Cap Screws, Inconel 718 Socket Head Shoulder Screws, Inconel 718 Socket Set Screws, Inconel 718 Flat Countersunk Head Cap Screws, Inconel 718 Hex Nuts, Inconel 718 Hex Jam Nuts, Inconel 718 Hex Slotted Nuts, Inconel 718 Heavy Hex Nuts, Inconel 718 Heavy Hex Jam Nuts, Inconel 718 Heavy Hex Slotted Nuts, Inconel 718 Heavy Square Nuts, Inconel 718 Hex Coupling Nuts, Inconel 718 Cap Nuts, Inconel 718 12-Point Nuts, Inconel 718 Flat Washers